Download MTK META Utility V88 Flash SPD PAC Firmware Free

MTK META Utility V88 is a Windows: small mobile tool Support Samsung UNISOC Flash PAC file via Boot ROM mode (SPRD U2S Diag) MTK Brom Bypass feature Support Unlock Network (META), Factory Reset – META, VIVO New SEC Read info, Disable Auth, remove user data screen lock reset FRP lock some supported MTK Auth bypass Model. Huawei USB Firmware update (Dload/Upgrade mode)

The Tool Tested Is Full Worked And tested You Need Best MTK Brom Bypass Tool Then You Visit Right Site and Download the Best Tool of MTK META Utility V88

MTK META Utility V88: 16.02.2023:

New Features & Enhancements:

• Added MTK Read [eMMC/UFS] dump via USB (512 MB) [one click].
• Added [Spreadtrum/UniSoC] .PAC firmware extract.
• Fixed (OPPO/Realme) [MTK/Qualcomm] ofp extraction procedure.
• Auto combine (repack) super images with multiple regions to save time and space,
  the software will auto-merge the first region only from CSV MAP… normally the first region would be (EU).
• Fixed Android Utils tab (some items were hidden in small screens (laptops)) now fixed.

• Added Huawei USB Firmware update (Dload/Upgrade mode), with super speed (20-38 MB/s).
• HiSilicon & Qualcomm & MTK and all SoC types are supported,
  both old & new devices are supported (EMUI 3.x to EMUI 10.x & Magic 3.x).
• Support all Huawei update types ([single APP] & [APP+CUST] & [APP+CUST+PRELOAD] & [APP+CUST+PRELOAD+PTABLES]).
• Load all sub update files (6 or less) with one click (smart firmware loader).
• 2 protocols were implemented (Fast Download protocol by default + old algorithm (a little bit slow))..
• Huawei MTK devices are now supported for META mode operation ([Board/Debug] SW mode required).
• Added Fast-boot Flash partition option (BL unlocked [kernel/debug] mode required).
• Fixed Huawei switch from normal mode to upgrade mode.
• Improved Huawei switch from Fastboot mode to upgrade mode procedure.
• Spread Trum/UNISOC .PAC flashing option optimized.
• MTK IC health check operation now supports UFS IC’s (auto-detection),
  we have implemented deep check functions to detect the real eMMC/UFS health info by DA mode,
  (It works even with Dead DRAM now).

MTK Brom Tab Support Feature:

• Disable Auth
• Dump Preloader
• Crash Preloader To BRom
• Reboot META
• Reboot AT Mode
• Reboot Factory Mode
• Reboot Fastboot Mode
• Write BOOT_SECTION (LUNO/BOOT1)
• Write USER SECTION (PGPT)
• Redmi 6A (cactus) Unlock Bootloader
• eMMC/UFS Health Check (BRom)
• Huawei Y9A (FRL-L22) Force Brom
• Huawei Y9A (FRL-L22) Exit Brom
• Honor X6 (VNE-LX2) Force Brom
• Honor X6 (VNE-LX2) Exit Brom
• LGE New SEC Force Brom (FM)
• VIVO New SEC Read info (FM)
• VIVO (MT6771/MT6765) Force Brom
• VIVO (MT6771/MT6765) Exit Brom
• VIVO (MT6771/MT6765) Remove Demo

META Tab Support Feature:

Insert partition name (nvram , system, para, etc,)

• Read META Info
• Read PART (META)
• Format PART (META)
• Write PART (META)
• Dump MDDB/APDB (META)
• Dump NV Regions (META)
• Dump USERAREA (META)
• Dump PGPT (META)
• Dump EXT_CSD (META)
• EMMC Health Check (META)
• Factory Reset – META
• Factory Reset – META (VIVO)
• Gen FRP Reset PKG (META)
• Read NVRAM (META)
• Wipe NVRAM (META)
• Write NVRAM (META)
• Unlock Network (META)

Android ADB TAB Support Feature:

• Read Adb Info
• Read Fastboot Info
• Exit Fastboot Mode
• Xiaomi Enable Diag (ADB)
• Install APK (ADB)
• Generic Fastboot Factory Reset
• Generic Fastboot FRP Wipe
• Generic ADB FRP Bypass
• Disable Payjoy APP (ADB)
• Wipe NVRAM_NVDATA (Fastboot)
• Extract RedMagic (payload.bin)

Extra TAB Support Feature:

• Huawei Fastboot To Upgrade
• Huawei Normal To Upgrade
• Vivo Demo Remove (AT)
• Vivo Demo Remove (MT68771)
• PGPT to Scatter
• Scatter to PGPT
• Parse Preloader
• Parse MTK DA

Samsung TAB Support Feature:

Added Samsung UNISOC Flash PAC file via Boot ROM mode (SPRD U2S Diag). A035F – A032F doesn’t have 2 U-Boot LDRs,

Restored some of the removed functions. Fixed VIVO F-Reset via META mode. also exists on SPD Research Tool, so here safe way to download Flash Samsung PC ROMs for devices,

Samsung Force Boot ROM (Crash By PGPT) back, we have restored it to support A136U. To exit Brom after using PGPT method, you will need a good PGPT to download as User-Section from Brom tab, GPT backups exists inside (MTK META Utility V75 SAMGPT) directory.

• Samsung F-Reset (MTP) New
• Samsung UniSoC Unlock Bootloader (FB) New
• Samsung UniSoC A03 (A035F) Boot Repair (FM) New
• Samsung UniSoC A03 LA (A035M) Boot Repair (FM) New
• Samsung UniSoC A03 (A035G) Boot Repair (FM) New
• Samsung UniSoC A03 Core (A032F) Boot Repair (FM) New
• Samsung UniSoC (A035F) Exit BRom (FM/FDL) New
• Samsung UniSoC (A035F) Force BRom (DM) New
• Samsung UniSoC ReLock Bootloader (FB) New
• Samsung UniSoC A03 Core LA (A032M) Boot Repair (FM) New
• Samsung UniSoC Write PAC file New
• Spread Trum/UniSoC Write PAC file New
• Samsung MTK Force Brom – BL (DM)
• Samsung MTK Force Brom – PGPT (DM)
• Samsung MTK Exit Brom (FM)
• Samsung SM-G532F Force Brom (FM)
• SM-A326U (A32 5G) BIT7 Fix Dead Brick
• SM-A037F KG Locked Force Brom (DM)
• Samsung MTK Rebulid PMT (DM)
• Samsung Read Info (DM)
• Samsung Reboot to (DM)
• Samsung Activate ADB (MTP)
• Samsung switch (SEC CTRL FLAG) to (-1)
• Samsung F-Reset (MTP)
• Samsung UniSoC UnLock Bootloader (FB)
• Samsung UniSoC A03 (A035F) Boot Repair (FM)
• Samsung UniSoC A03 LA (A035M) Boot Repair (FM)
• Samsung UniSoC A03 (A035G) Boot Repair (FM)
• Samsung UniSoC A03 Core (A032F) Boot Repair (FM)
• Samsung UniSoC (A035F) Exit Brom (FM/FDL)
• Samsung UniSoC (A035F) Force Brom (DM)
• Samsung UniSoC Relock Bootloader (FB)
• Samsung UniSoC A03 Core LA (A032M) Boot Repair (FM)
• Samsung UniSoC Write PAC file.
• Spread Trum/UniSoC Write PAC file.
• Samsung Galaxy M13 5G: (SM-M136B, SM-M136B/DS)
• Samsung Galaxy F42 5G: (SM-E426B, SM-E426B/DS)
• Samsung Galaxy A31: (SM-A315F, SM-A315F/DS, SM-A315G/DS, SM-A315G, SM-A315N)

Firmware Utils TAB Support Feature:

• Extract Samsung ROM (MTK)
• Extract Huawei UPDATE (MTK)
• Extract OFP (MTK + QCOM)
• Extract LG ROM (.kdz)
• Extract MTK Preloader from (BOOT1&LUNO)
• Extract Super IMG
• Extract OnePlus ROM (.ops)

QUALCOMM TAB Support Feature:

• Patch Xiaomi Qualcomm MI Account Lock

Huawei Dload Flasher TAB Support Feature:

• Load Firmware Package
• Switch Device from Fastboot Mode
• USE old HDLC algo
• USB Firmware Update
• Click to load HUWEI PTABLE BASE here.
• Click to load HUWEI UPDATE BASE here.
• Click to load HUWEI PTABLE CUST here.
• Click to load HUWEI UPDATE CUST here.
• Click to load HUWEI PTABLE PRELOAD here.
• Click to load HUWEI UPDATE PRELOAD here.
• Click to load HUWEI BOARD SOFTWARE here.

Below are all the necessary driver links for MTK META Utility:

File Name	Download Link
USB_Driver 32 bit	Download
USB_Driver 64 bit	Download
SPD USB Driver	Download
Linux USB win32 Driver	Download

How To Install MTK META Utility V88:

1. Download and extract the USB s (RAR) file on your computer.
2. Run the MTKMETAUtility.exe setup file.
3. It will prompt a User Account Control page for permission. Tap Yes.
4. Next, click on Install now in the USB installation window.
5. A Windows Security message will pop up on the screen. Click on Install.
6. Finally, a successful message will appear. Just tap on the Finish button.

MTK META Utility V88 Huawei Device Tested Report

Waiting for fastboot device… [FBSN:HYJNW18A27001862]
Model : INE-LX1
D_Model : INE-L21
FW Ver : INE-LX1 9.1.0.316(C185E1R1P1)
System : INE-LX1 9.0.1.170(SP53C185E2R1P1)
Base VER : INE-LGRP2-OVS 9.1.0.316
Custom : INE-LX1-CUST 9.1.0.1(C185)
Preload : INE-L21-PRELOAD 9.0.1.1(C185R1)
Bl_Lock : LOCKED
Region : HW/MEAFNAF
Battery : 3519MV
HW_KEY : HUAWEI_KEY_V1
Rescue_v : RESCUE0.6
Download kernel…
target reported max download size of 471859200 bytes
sending ‘rescue_recovery_kernel’ (24576 KB)…
OKAY [ 0.631s]
writing ‘rescue_recovery_kernel’…
OKAY [ 0.184s]
finished. total time: 0.814s
Download recovery_ramdisk…
target reported max download size of 471859200 bytes
sending ‘rescue_recovery_ramdisk’ (32768 KB)…
OKAY [ 0.840s]
writing ‘rescue_recovery_ramdisk’…
OKAY [ 0.012s]
finished. total time: 0.852s
Download recovery_vendor…
target reported max download size of 471859200 bytes
sending ‘rescue_recovery_vendor’ (16384 KB)…
OKAY [ 0.421s]
writing ‘rescue_recovery_vendor’…
OKAY [ 0.009s]
finished. total time: 0.430s
rescue_ugs_port: UGSA
finished. total time: 0.001s
(bootloader) This is sec phone!!
rescue_enter_recovery: start to hisuite mode!
finished. total time: 0.187s
Waiting for huawei usb device… ok
●●●●●● Start init download mode ●●●●●●
●●●●●● Start write update base ●●●●●●
● Writing HDR{B2E4} Done!
DownloadByID SHA256RSA… Ok
DownloadByID CRC… Ok
DownloadByID VERLIST… Ok
DownloadByID CURVER… Ok
DownloadByID PACKAGE_TYPE… Ok
DownloadByID HISIUFS_GPT… Ok
DownloadByID XLOADER… Ok
DownloadByID FASTBOOT… Ok
DownloadByID DTS… Ok
DownloadByID DTO… Ok
DownloadByID VECTOR… Ok
DownloadByID FW_LPM3… Ok
DownloadByID HHEE… Ok
DownloadByID TEEOS… Ok
DownloadByID TRUSTFIRMWARE… Ok
DownloadByID SENSORHUB… Ok
DownloadByID FW_HIFI… Ok
DownloadByID KERNEL… Ok
DownloadByID VBMETA… Ok
DownloadByID MODEMNVM_UPDATE… Ok
DownloadByID MODEMNVM_CUST… Ok
DownloadByID RECOVERY_RAMDISK… Ok
DownloadByID RECOVERY_VENDOR… Ok
DownloadByID RECOVERY_VBMETA… Ok
DownloadByID ENG_VENDOR… Ok
DownloadByID ENG_SYSTEM… Ok
DownloadByID CACHE… Ok
DownloadByID SYSTEM… Ok
DownloadByID CUST… Ok
DownloadByID ISP_FIRMWARE… Ok
DownloadByID MODEM_FW… Ok
DownloadByID HISEE_IMG… Ok
DownloadByID HISEE_FS… Ok
DownloadByID VENDOR… Ok
DownloadByID VERSION… Ok
DownloadByID ODM… Ok
DownloadByID PRODUCT… Ok
DownloadByID PREAS… Ok
DownloadByID PREAVS… Ok
DownloadByID USERDATA… Ok
DownloadByID PRELOAD… Ok
DownloadByID ERECOVERY_KERNEL… Ok
DownloadByID ERECOVERY_VENDOR… Ok
DownloadByID ERECOVERY_RAMDISK… Ok
DownloadByID ERECOVERY_VBMETA… Ok
DownloadByID PATCH… Ok
Download update base partitions ok!
●●●●●● Start write update cust ●●●●●●
● Writing HDR{8CF1} Done!
DownloadByID SHA256RSA… Ok
DownloadByID CRC… Ok
DownloadByID VERLIST… Ok
DownloadByID CURVER… Ok
DownloadByID PACKAGE_TYPE… Ok
DownloadByID VERSION… Ok
DownloadByID USERDATA… Ok
DownloadByID PRELOAD… Ok
Download update cust partitions ok!
● Rebooting device… ok

Download MTK META Utility V88 Flash SPD PAC Firmware Free

NAME!	INFORMATION!
File Name:	MTK META Utility V88.rar
File Type	Free
File Size:	58. MB
Credits:	All MTK META Utility: tool developer Mofadal El-Tayeb All credits Tool developer
Category’s:	Download ALL MTK META Utility
How To Download:	To Guideline Download All File HERE
RAR Password:	gsmflashrom.com
Google-Driver LINK 1	drive.google.com/file
MEGA-Driver LINK 2	MEGA-drive/file

What is the difference between MTK META Utility V88?

New MediaTek MT8696 / 8195/6833 support
The authentication service has been improved.
Added support for MTK Flash on the Android tab.
One key MTK exploitation has been added.
SPD boot error issue fixed.
Server errors have also been corrected.
Oppo newly supports EMMC 5.1 and UFS 2.1
A New Oppo Vivo model has been added for meta mode factory reset.
Oppo Realme has added support for newer models for factory reset via meta mode.

• EMMC 5.1 and UFS 2.1 memory supported.
  • MTK Helio G35
  • Helio G70
  • MTK Helio G80
  • Helio G85
  • MTK Helio G90T
  • MTK Dimensity 720 5G
  • Density 800U 5G
  • MTK Helio P70
  • (MediaTek Dimensity 810) Latest New, Added
  • MediaTek MT6833 Dimensity 700 CPU: Latest New, Added        * 
  • MT6877 MediaTek (Dimensity 900 5G).
  • MT6877V/ZA MediaTek (Density 900 5G).
  • MT6877V/NZA MediaTek (Dimensity 900 5G).
  • MT6877V/TZA MediaTek (Dimensity 900 5G).
  • MT6877V/TNZA MediaTek (Dimensity 900 5G).
  • MT6883 (Dimensity 800)
  • MT6883V/ZA (Dimensity 800)
  • MT6883Z (Dimensity 1000C)
  • MT6885 (Dimensity 1000L)
  • MT6885Z (Dimensity 1000L)
  • MT6889 (Dimensity 1000)
  • MT6889Z (Dimensity 1000+)
  • MT6890 (T750 5G-integrated SoC)
  • MT6880 (Milestone Silver)
  • MTK Helio P90
  • Helio P95
  • MTK MT6753
  • MT6779
  • New MT6795
  • MediaTek MT6797
  • [New] MediaTek MT6595

• Add support for chipsets that support MTK No Auth and No Authorized function.
  • MT6781 MediaTek (Helio G96).
  • MT6755
  • MT6750
  • MT6750M
  • MT6750T
  • MT6750S
  • MT6757
  • MT6761
  • MT6762
  • MT3369
  • MT8766B
  • MT6763
  • MT6765
  • MT6768
  • MT6771
  • MT6779
  • MT6753
  • MT6739
  • MT6768(2021) MediaTek (Helio G88).
  • MT6877 *new
  • MT6883 *new
  • MT6885 *new
  • MT6889 *new
  • MT6833
  • MT6853
  • MT6853V
  • MT6750
  • MTK Helio G85
  • MTK Helio G80
  • MTK Helio G70
  • MTK Helio P95
  • MTK Helio P90
  • MTK Helio P70
  • MTK Helio P60
  • MTK Helio X30
  • MTK Helio X25
  • MTK Helio X20
  • MT6873
  • MT6572
  • MT6768
  • MT6735
  • MT6737
  • MT6739
  • MT6765
  • MT6785
  • MT6771
  • MT8127
  • MT8163
  • MT8173
  • MT8695
  • MT8696
  • MT8195
  • MT6833

Final Words:

Here, we are nearing the end of the article. I hope you really enjoyed it and learned how to download MTK META Utility V88 latest setup.

Hope you learned about the MTK META Utility properly and how to use it. But still, if you have any questions regarding Android Unlock or have any difficulty in using this tool, feel free to contact me in the comment box below. Also, give me some tips on how I can improve.

Attention Please:

[*]: [This process is 100% safe. But if you do anything wrong and got bricked your device then any of us are not responsible for your action. We can only give you a suggestion, nothing more.]

[*]: All device names, logos, and brands are the property of their respective owners. All company, device, and service names used in this Blog are for identification and learning purposes only.

Stay with Gsm Flash Rom for how to download installing any Android official firmware/flash file fully free. If you find any errors in the guidelines given by us, please let us know in the comment box below.